Magnetic quadrupole doublet focusing system for high energy ions

A high energy focused ion beam microprobe using a doublet arrangement of short magnetic quadrupole lenses was used to focus 1-3 MeV protons to spot sizes of 1x1 microm2 and 1-4.5 MeV carbon and silicon ion beams to spot sizes of 1.5x1.5 microm2. The results presented clearly demonstrate that this simple doublet configuration can provide high energy microbeams for microanalysis and microfabrication applications.     

Sinter forging of zirconia toughened alumina

Sinter forging experiments have been carried out on powder compacts of zirconia toughened alumina (ZTA) Ceramics Alumina-15 wt% zirconia was prepared by a gel precipitation method and calcined at temperatures of 900 or 1100°C. Full densification of ZTA ceramics was obtained within 15 min at 1400°C and 40 MPa. A homogeneous microstructure can be observed with an alumina grain size of 0.7 m and a zirconia grain size of 0.2 m. Almost no textural evolution occurred in the microstructure. During sinter forging the densification behaviour of the compacts was improved by an effective shear strain, for which values of more than 100% could be obtained. As a result of the shear deformation the densification of ZTA in the alumina phase stage shifted to lower temperature. During pressureless sintering the to alumina transformation temperature was dependent of the preceding calcination temperature, while during sinter forging this phase transformation was independent of calcination temperature and took place at a lower temperature.     

The effect of ceria co-doping on chemical stability and fracture toughness of Y-TZP

The fracture toughness and ageing resistance of yttria, ceria-stabilized tetragonal zirconia polycrystals (Y, Ce-TZP) were evaluated as a function of grain size and ceria content. Very fine grained, fully dense materials could be produced by sinter forging at relatively low temperatures (1150–1200 °C). The ageing resistance in hot water (185 °C) of 2 mol% Y₂O₃-stabilized TZP is strongly enhanced by alloying with ceria. The ceria content necessary to avoid degradation completely, decreases with grain size. The toughness of fully dense Y, Ce-TZP is 7–9 MPa m^1/2 for grain sizes down to 0.2 m. No or very little transformation took place during fracturing and no clear variation with grain size was observed for the toughness at grain sizes up to 0.8 m. Reversible transformation and crack deflection may explain the observed toughness values.     

情景感知驱动的移动对象多模式轨迹预测技术综述

如何利用多源异构时空数据进行准确的轨迹预测并且反映移动对象的移动特性是轨迹预测领域的核心问题.现有的大多数轨迹预测方法是长序列轨迹模式预测模型,根据历史轨迹的特点进行预测,或将当前移动对象的轨迹位置放入时空语义场景根据历史移动对象轨迹预测位置.综述当前常用的轨迹预测模型和算法,涉及不同的研究领域.首先,阐述了多模式轨迹预测的主流工作,轨迹预测的基本模型类;其次,对不同类的预测模型进行总结,包括数学统计类、机器学习类、滤波算法,以及上述领域具有代表性的算法;再次,对情景感知技术进行了介绍,描述了不同领域的学者对情景感知的定义,阐述了情景感知技术所包含的关键技术点,诸如情景感知计算、情景获取和情景推理的不同类模型,分析了情景感知的不同分类、过滤、存储和融合以及它们的实现方法等.详细介绍了情景感知驱动的轨迹预测模型技术路线及各阶段任务的工作原理.给出了情景感知技术在真实场景中的应用,包括位置推荐,兴趣点推荐等,通过与传统算法对比,分析情景感知技术在此类应用中的优劣.详细介绍了情景感知结合LSTM (long short-term memory)技术应用于行人轨迹预测领域的新方法.最后,总结了...     

Generalization of the ordinary state-based peridynamic model for isotropic linear viscoelasticity

This paper presents a generalization of the original ordinary state-based peridynamic model for isotropic linear viscoelasticity. The viscoelastic material response is represented using the thermodynamically acceptable Prony series approach. It can feature as many Prony terms as required and accounts for viscoelastic spherical and deviatoric components. The model was derived from an equivalence between peridynamic viscoelastic parameters and those appearing in classical continuum mechanics, by equating the free energy densities expressed in both frameworks. The model was simplified to a uni-dimensional expression and implemented to simulate a creep-recovery test. This implementation was finally validated by comparing peridynamic predictions to those predicted from classical continuum mechanics. An exact correspondence between peridynamics and the classical continuum approach was shown when the peridynamic horizon becomes small, meaning peridynamics tends toward classical continuum mechanics. This work provides a clear and direct means to researchers dealing with viscoelastic phenomena to tackle their problem within the peridynamic framework.     

Sensitive and Reversible Detection of Methanol and Water Vapor by In Situ Electrochemically Grown CuBTC MOFs on Interdigitated Electrodes

The in situ electrochemical growth of Cu benzene‐1,3,5‐tricarboxylate (CuBTC) metal–organic frameworks, as an affinity layer, directly on custom‐fabricated Cu interdigitated electrodes (IDEs) is described, acting as a transducer. Crystalline 5–7 µm thick CuBTC layers are grown on IDEs consisting of 100 electrodes with a width and a gap of both 50 µm and a height of 6–8 µm. These capacitive sensors are exposed to methanol and water vapor at 30 °C. The affinities show to be completely reversible with higher affinity toward water compared to methanol. For exposure to 1000 ppm methanol, a fast response is observed with a capacitance change of 5.57 pF at equilibrium. The capacitance increases in time followed diffusion‐controlled kinetics (k = 2.9 mmol s^?0.5 g^?1_CuBTC). The observed capacitance change with methanol concentration follows a Langmuir adsorption isotherm, with a value for the equilibrium affinity K _e = 174.8 bar^?1. A volume fraction f _MeOH = 0.038 is occupied upon exposure to 1000 ppm of methanol. The thin CuBTC affinity layer on the Cu‐IDEs shows fast, reversible, and sensitive responses to methanol and water vapor, enabling quantitative detection in the range of 100–8000 ppm.     

A particle‐based moving interface method (PMIM) for modeling the large deformation of boundaries in soft matter systems

The mechanics of the interaction between a fluid and a soft interface undergoing large deformations appear in many places, such as in biological systems or industrial processes. We present an Eulerian approach that describes the mechanics of an interface and its interactions with a surrounding fluid via the so‐called Navier boundary condition. The interface is modeled as a curvilinear surface with arbitrary mechanical properties across which discontinuities in pressure and tangential fluid velocity can be accounted for using a modified version of the extended finite element method. The coupling between the interface and the fluid is enforced through the use of Lagrange multipliers. The tracking and evolution of the interface are then handled in a Lagrangian step with the grid‐based particle method. We show that this method is ideal to describe large membrane deformations and Navier boundary conditions on the interface with velocity/pressure discontinuities. The validity of the model is assessed by evaluating the numerical convergence for a axisymmetrical flow past a spherical capsule with various surface properties. We show the effect of slip length on the shear flow past a two‐dimensional capsule and simulate the compression of an elastic membrane lying on a viscous fluid substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

Improving content visibility for high‐ambient‐illumination viewable display and energy‐saving display

Abstract— Nowadays, low‐contrast viewing of LC displays (LCDs) occurs very often, which includes the viewing of mobile LCDs at high ambient illumination and the viewing of LCDs at low‐power mode. These cases result in low‐content visibility and low contrast, leading to an unpleasant viewing experience. In this paper, a technique to improve the perceived contrast and visibility of images at low‐contrast viewing conditions is proposed. The proposed approach enhances image brightness with content and ambient adaptive image brightening and highlights visual parts and boundaries with non‐photorealistic rendering. The proposed technique enables longer battery life for mobile LC devices and makes mobile LC devices viewable at high ambient illumination. It also enables TVs with extreme low‐power consumption and smart‐grid responsive TVs.     

A Fully Dynamic Graph Algorithm for Recognizing Interval Graphs

We present the first dynamic graph algorithm for recognizing interval graphs. The algorithm runs in O(nlog?n) worst-case time per edge deletion or edge insertion, where n is the number of vertices in the graph. The algorithm uses a new representation of interval graphs called the train tree, which is based on the clique-separator graph representation of chordal graphs. The train tree has a number of useful properties and it can be constructed from the clique-separator graph in O(n) time.